5X Faster,
Extra Intelligent.

AnkerMake M5 3D Printer by Anker

5X Faster
Printing[1]

Precise 0.1 mm
Detail[2]

Built-In
Al Camera
Monitoring

Hub Connects
Multiple
Devices

Phone

Computer

Display

7×7
Auto-Leveling

Auto-Created
Timelapses

Easy Assembly

Aluminum Alloy Structure

Print Volume
235×235×250 mm³

Explore the
3D Printing Frontier

AnkerMake M5 prints 5X faster with 0.1 mm precision.
Built-in AI Camera Recognition system keeps your prints on track.
Stop the wait and let us help you print smart and fast at every step.

Start Your Prints with M5

Start Your
Print with M5

See M5 in Action

Make It Quality, Fast

See True High-Speed

Printing Speed 250 mm/s
Printing Speed 50 mm/s
Autodesk Kickstarter Geometry
Printing speed: M5 (250 mm/s) | Others (50 mm/s)

Cut Printing Time by 69%

Tests were conducted by AnkerMake in Sep. 2022 using AnkerMake FDM 3D Printer at a standard operating speed of 250 mm/s.[4]

Autodesk Kickstarter Geometry
2 Hr 8 Min
6 Hr 52 Min
75×70×92 mm
1 / 2
  • Driven by PowerBoost™

    You'll achieve high-speed precision thanks to PowerBoost™, which optimizes energy with its Y-axis transmission system. PowerBoost™ uses a powerful stepper motor, double-belt driveshaft, and stabilized-motion algorithm to push out loads of extra power for high-speed printing.

    Standard Speed

    250 mm/s

    Accelerated Speed

    Up to 2,500 mm/s²

Precise 0.1 mm
Detail

Never compromise on stable quality even when you're printing at 5X speed. AnkerMake M5 frees yourself from sanding with smoothness in every thick layer.

New Ultra-Direct Extruder [5]

With a redesigned ultra-direct extruder, you feel the intricate details after a 5X faster print.
The shortened distance between the extruder and nozzle reduces errors and enhances control for the precision.
A proven algorithm analzyes and matches motion to extrusion. It was fine-tuned with more than 2,000 tests in the AnkerMake lab.

3.1X

Extrusion

[6]

Higher Multi-Stage Gear Ratio

The foundation of high-speed printing starts with the enhanced multi-stage gear system with a 9.37 reduction ratio putting out 0.8 N·m of torque. The strong twisting puts pressure on the melting chamber to make extrusion faster.

1.5X

Melting

[7]

Larger Heating Block

The 60W heating rod quickly raises the nozzle temperature to 392°F (200°C) with 1.5X the efficiency of other printers. The heat makes sure the filament smoothly discharges while printing fast at 250 mm/s.

1.3X

Cooling

[8]

More Air Input Volume

The double-cooling system uses a pair of fans that push out 1.3X the air output volume of other printers at max-speed. The cooling avoids stringing and helps quickly cool down your model.

Integrated Die-Cast Aluminum Alloy

The integrated die-cast aluminum alloy structure and Z-axis design increase the weight of the base, reducing the center of gravity of the machine. The design makes printing more stable for fast speed and turbo acceleration. This also reduces installation errors for the base, improving printer accuracy.

Larger Z-Axis Cross-Section
Double Z-Axis Leadscrew Motors
Integrated Base

Make It Intelligent

Powerful Processing

M5 comes packed with two processors, including the XBurst CPU for intelligent 3D printing and Marlin CPU for routine processing. With the extra power, M5 keeps track of your prints so your model matches your design.

  • 3-Core Heterogeneous CPU (1.2GHz ×2 + 240MHz)
  • Specialized for Image Recognition (VPU, ISP ×2, CIM)
  • Designed for the Artificial Intelligence of Things (AIoT)

The Integrated
Intelligent Camera

· 1080p Full HD Resolution
· Real-Time Monitoring (Up to 720p)
· Timelapse Videos (1080p)
· Frame Rate: 30 fps

Worry-Free Printing with M5

AI Recognition
Error Notification
Live Monitoring
One-Click Sharing

AI Camera
Recognition
System[9]

The AnkerMake slicer analyzes the 3D data of the model before printing begins, then the AI Recognition System uses the powerful XBurst CPU to continually check and compare throughout the entire process.

Make It Anywhere[10]

Start Prints Whenever, Wherever

Whenever the moment of inspiration strikes, you'll be able to access your prints wherever you are. You can even track prints, pause tasks, or modify settings.

AnkerMake Slicer

Make It Easy

Make It Easy to 3D
Print at Home

Integrated Design Keeps
Your Workspace Tidy

Avoid tangled cables and multiple stray devices with 1 neat, cohesive design. M5 consists of the base and the gantry frame, plus the Z-axis design hides any dangling wires from your view.

Get Printing Status
Notifications

You've got your choice of how to find out when something changes with your 3D print. See an LED light 33 ft (10 m) away, hear a beep, or get an app alert.

4.3" Touch Screen Simplifies
Printing

Make the most common tasks easy with a smart, colorful LCD touchscreen. You can also switch to Night Mode to help your eyes when you're working late.

7x7 Auto-Leveling

Give your prints accuracy with 7x7 auto-leveling. Advanced algorithms calculate a virtual height map to get the print started right. The only time you need to do any tweaks by hand is when you upgrade something major like the nozzle or PEI soft magnetic steel plate.

Bendable and Scratchproof
Plates

No matter how big or small, removing a print is now easy with just a slight bend of the scratch-resistant PEI soft magnetic steel plate when it cools down. And with the heated bed's magnetic design, you can easily remove and put the print sheet back.

Print Large Models with High-Speed Efficiency

Supersize your prints to a whopping 235×235×250 mm³ and watch M5 handle the job fast at 5X speed.

Save Material with Instant
Alerts

Never waste a moment or an ounce of filament again with low filament and error alerts. M5 scans before and during the print to ensure your print comes out exactly to your specifications.

Easy to Assemble
Resume Printing

Assemble Easily

It doesn't take a degree to assemble M5, just 15 minutes from the time M5 arrives at your door.

Take out all the accessories.
Fasten the screws at the bottom.
Start your print.

Reduce Energy Use by 59%[11]

Printing time isn't the only thing getting cut by 70%. Help the planet as you cruise along at 5X speed.

[1] The standard operating speed of AnkerMake is 250 mm/s. Compared to other regular 3D printers working at 50 mm/s as a standard operation speed, AnkerMaker works 5 times faster.
[2] Tests were conducted by AnkerMake in Sep. 2022 using AnkerMake M5 3D Printer at a standard operation speed of 250 mm/s. Test results reflect the approximate performance of AnkerMake M5 3D Printer. The tested model was a standard cube with a volume of 50×50×50 mm³.
[3] The green grid line demonstrates a creative idea.
[4] Tests were conducted by AnkerMake in Sept. 2022 using AnkerMake M5 3D printer at a standard operating speed of 250 mm/s. The test results reflect the approximate performance of AnkerMake M5 3D Printer:

Printing Parameters

AnkerMake M5:
Layer Height: 0.2 mm
Infill Overlap Percentage: 5%
Wall Line Counts: 3
Layers Printing Speed: 250 mm/s

Benchmark:
Layer Height: 0.2 mm
Infill Overlap Percentage: 5%
Wall Line Counts: 3 Layers
Printing Speed: 50 mm/s.

Models Downloaded From:
Geometry: github.com (Autodesk x Kickstarter open-source #FDMtest)
Cube: Designed by AnkerMake lab.
[5] The distance from the extruder gear to the top of the melting chamber is 58 mm. The same distance in other distal extrusion 3D printers is around 400 mm.
[6] The reduction ratio of AnkerMake is 9.37, compared to regular 3D printers with a reduction ratio between 3.0 to 3.5.
[7] The volume of the heating block in AnkerMake is 6,000 mm³, compared to other 3D printers with a heating block volume of 4,000 mm³.
[8] The extruder of AnkerMake M5 has two fans inside. The output of air volume is 130% larger than a single fan.
[9] Only AnkerMake Slicer supports AI recognition.
[10] The 3D printer needs to be connected with the AnkerMake app. The app only works when all linked devices are connected to the Internet.
[11] Tests were conducted by AnkerMake in Aug. 2022 comparing AnkerMake M5 3D Printer at a standard operation speed of 250 mm/s and another 3D printer at a standard operation speed of 50 mm/s. The average AC power printing in 10 minutes of AnkerMake M5 was 110 W, and the other printer was 80 W during the printing process. When printing time is cut 70%, power consumption is reduced by 59%.
Nozzle Temp: 428°F (220℃)
Print Bed Temp: 140°F (60℃)
Ambient Temperature: 77°F (25℃)
Filament: PLA
Test Equipment: Wattmeter

Specs

Printing Parameters

Print Volume (L×W×H)
235×235×250 mm³
Standard Speed
250 mm/s
Acceleration
2,500 mm/s²
Operation Speed
50-250 mm/s
Print Precision
±0.1 mm[1]
Nozzle Diameter
0.4 mm (Compatible with 0.2/0.6/0.8 mm)
Filament Diameter
1.75 mm
Print Materials
PLA/PETG/TPU/ABS
Extruder Temperature
Maximum 500°F (260℃)
Heating Plate Temperature
Maximum 212°F (100℃)

Printing Features

Extruder
Ultra Direct Extruder
Part Cooling
Double Cooling Fan
Extruding Gear
Double Hardened Steel
Heated Plate
PEI Soft Magnetic Steel
Auto-Leveling
Auto 49 (7×7) Points
Filament Sensor
Broken Material Detection
Resume Printing
Supported

Electronic

CPU
Dual XBurst(1.2GHz) + XBurst 0(240MHz)
Operation System
Linux
EMMC
8 GB
Connection
Wi-Fi (App, AnkerMake Slicer), Type-C USB Flash Drive, OTA Upgrade
Camera
Detection: AI Recognition
Real-Time Monitoring: Up to 720p
Timelapse Videos: 1080p
Timelapse Videos Frame Rate: 30fps
Night Vision: Infrared + LED
Display
4.3-Inch Touch Screen
Remote Control
AnkerMake App, AnkerMake Slicer
Voice Assistant
The Google Assistant, Amazon Alexa (Printing Status Check)
Power
350W
Power Input
AC 100-240V

Software

Slicer Software
AnkerMake Slicer (macOS, Windows), Simplify 3D, Ultimaker Cura, PrusaSlicer
File Input Format
STL, OBJ
Supported OS
MacOS, Windows

Body

Machine Size
502x438x470 mm (Without Filament Holder)
Net Weight[2]
27.3 lb / 12.4 kg
Gross Weight[3]
32.6 lb / 14.8kg

[1] Test Model: Cube- 50mm x 50mm x 50mm
[2] For products shipped to different countries, net weight may have slight differences.
[3] For products shipped to different countries, gross weight may have slight differences.

We use cookies to ensure you get the best experience on our website. By continuing to browse, you agree to our use of cookies.