AnkerMake PLA+ Filament (2-Pack)

AnkerMake M5 supports PLA, PETG, TPU, and ABS filaments. The heatbed temperature can reach up to 100°C / 212°F, and the nozzle temperature can reach up to 260°C / 500°F.

It is highly recommended to use PLA+ materials from AnkerMake, but M5 is compatible with most PLA 3D printing materials. Print results may be slightly different depending on the material you use.

Yes, you need to use a hardened steel nozzle and an all-metal throat part.

PLA+ is in compliance with RoHS Directives 2011/65/EU and (EU) 2015/863 and REACH regulation, which means it does not contain toxic or harmful substances. However, the printed PLA+ products might have horizontal lamination. Bacteria are prone to grow on horizontal lamination. We don't recommend to use printed products for food applications.

Unopened filaments are recommended to be stored in a clean, dark, and ventilated place with an ambient temperature lower than 50°C / 122°F and a humidity level lower than 30%. Opened and unused filaments are recommended to be stored in vacuum bags or special drying boxes. If your unused filaments have been left in the open for a long period of time, we highly recommend you to dry the filaments before using them to print.